HSS Broach Cutters

Home/Broach Cutters/HSS Broach Cutters
  • Available in Ø 12 mm – Ø 69 mm with 19 mm standard shank (Weldon), 1 mm ascending Available in Ø 70 mm – Ø 100 mm with 32 mm standard shank (Weldon), 1 mm ascending With cutting depths: 30 mm, 50 mm, 75 mm, 100 mm (6,35 mm pilot pin hole) (* Half sizes or special diameters on request.) Article numbers: (** = diameter)
    • **S for 30 mm cutting depth
    • **L for 50 mm cutting depth
    • **x75 for 75 mm cutting depth
    • **x100 for 100 mm cutting depth
     MAGTRON broach cutters are equipped with a special geometry for optimal cutting conditions, longer tool life and smooth cutting against limited chance on breakage.
  • Optional available on all our HSS & HSS-Co8 broach cutters Article numbers:
    • Coat1 for broach cutters till Ø 32 mm
    • Coat2 for broach cutters till Ø 50 mm
    • >50mm on request
    Especially at upside down cutting, coolant- or cutting- fluids cannot be used. By using a multi layer TiAlN – Futura coating, breakage will be reduced considerable and increase of life will be realized, even at  “dry cutting” and up to 30% higher cutting speeds can be achieved.